Edwardian.
An Edwardian conservatory with glazed-to-ground frames.
Click here for drawing plans
Custom Designed.
A freestanding twin hipped Edwardian conservatory, incorporating a covered walkway from the client's house.
Victorian
Victorian Conservatory with 5 facets.
Click here for drawing plans
Custom Designed.
An internal view of a large Edwardian conservatory incorporating a lantern style roof and portal frame supports.
Custom Designed.
Compound roof with two pitches use to enclose a patio area.
P.Shape.
A Victorian/ Lean-to P Shape on an elevated site.
Click here for drawing plans.
Lean to.
A large lean to conservatory (with special heavy duty roof) installed on a single storey house.
Click here for drawing plans.
Double Hipped Edwardian.
Double hipped Edwardian conservatory with box gutter at rear.
Click here for drawing plans.
3 Bay Victorian
A three faceted Victorian conservatory with dwarf wall.
Click here for drawing plans.
Gable Ended
Gable ended conservatory designed to cope with extreme snow loadings on the roof.
Click here for drawing plans.
Lean-to
with hipped ends.
A lean-to's style can be improved by adding hipped ends.
Click
here for drawing plans
A T Shape conservatory with a Victorian centre section.
Click here for drawing plans
The building used a double hipped roof with an entrance porch incorporated in one corner. A lantern section is built into the apex of the roof to provide adequate ventilation in the high temperatures which prevail in the area. To reduce heat build-up and control glare, specialised heat reflective polycarbonate materials are used as a glazing medium in the roof, and these have proved to be very effective.
The entire building, which measures 15m x 9m (49' x 29') is built over a steel frame, which actually passes through the garage structure into foundation pads. To ensure accurate construction, close liaison between Tull & Darch and the local steel fabricators was necessary.
The photographs below are interior and exterior views of the finished building.
